『Harga Flow Meter Industri: Daftar Harga Terbaru Alat Ukur Aliran Air, Gas, dan Minyak』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)
Harga Flow Meter Industri: Daftar Harga Terbaru Alat Ukur Aliran Air, Gas, dan Minyak
Quick Answer: For clean water and wastewater, an electromagnetic flow meter from Silver Automation Instruments starts around USD 320 and can reach USD 2,400 for large DN300 lines. For diesel and oil, oval gear or Coriolis mass flow meters range from USD 300 to USD 12,000 depending on line size and accuracy. Gas flow meters usually cost USD 450 to USD 5,000 because they often need pressure and temperature compensation. Send pipe size, flow range, pressure, and temperature on WhatsApp +86-25-52155837 for a fixed price today.
If you searched for harga flow meter industri, you are likely building a budget for a water, gas, or oil metering project. We serve many buyers in Indonesia, Vietnam, Malaysia, and Australia. These buyers compare price first, then check compatibility. So we explain the price drivers below without vague estimates.
What Actually Drives Industrial Flow Meter Price
Flow meter price is not a single number. It depends on line size, wetted material, transmitter output, and hazardous area rating. A DN15 Coriolis meter for palm oil costs less than a DN50 Coriolis meter for crude oil because the flow tube is smaller and the body material is simpler. But a DN50 electromagnetic meter for seawater with a PTFE liner and titanium electrodes will cost more than a standard DN50 unit for clean river water.
Most engineers skip this part during first budget planning. They ask for a general flow meter price, then realize the process data changes the model. We have seen this on customer sites many times. A water utility in Vietnam asked for a cheap water meter. After we checked the pipe size and the signal output, they needed a 24 V DC powered meter with 4-20 mA HART, not a battery unit. The price changed from USD 340 to USD 520. That is normal.
Latest Price Guide for Water and Wastewater Flow Meters
Electromagnetic flow meters are the main choice for clean water, raw water, desalination brine, and wastewater. They have no moving parts and work with µS/cm conductivity as low as 5. For standard carbon steel or welded pipe systems, we recommend the Silver Instruments electromagnetic flow meter series with rubber or PTFE liner. Prices normally start at USD 320 for DN15 and go up to USD 2,400 for DN300 with IP68 remote display.
For a desalination plant seawater flow meter, specify titanium or hastelloy electrodes and a PTFE liner. This configuration costs about USD 850 for DN50 and USD 1,900 for DN100. In practice, seawater applications also need surge protection and a remote transmitter. We ask customers to send salinity, pipe material, and maximum flow rate before quoting.
Latest Price Guide for Oil and Diesel Flow Meters
For diesel, heavy fuel oil, palm oil, and crude oil, the flow meter type depends on viscosity and pipe size. Oval gear flow meters handle 1 cP to 2,000 cP liquids directly. A DN25 oval gear flow meter for diesel starts around USD 320. A DN50 oval gear meter with a pulse output for a fuel skid costs about USD 600 to USD 900.
For higher accuracy or mass-based custody transfer, a Coriolis mass flow meter is the correct tool. Silver Instruments Coriolis mass flow meter for DN15 starts at USD 2,800. DN25 is about USD 3,600. DN50 can reach USD 7,500 to USD 12,000 depending on the transmitter and hazardous area certification. A palm oil supplier in Medan ordered a DN25 Coriolis meter with ATEX Zone 1 approval last year. The order included PT100 temperature compensation and 4-20 mA HART output. Their purchased price was USD 3,900 ex-works China.
A paint manufacturer in Southeast Asia ordered a DN40 oval gear meter for solvent batching. Their final cost was USD 540 with pulse output and a local display. Small changes in viscosity or fitting type can move the price by 10 to 20 percent.
Latest Price Guide for Gas Flow Meters
Gas flow measurement
For wet or dirty gas, many plants use vortex flow meters. A DN40 vortex flow meter with integrated pressure and temperature compensation costs around USD 800. A DN100 unit for steam or natural gas can sit between USD 1,200 and USD 3,500. So the price difference comes down to line size, turndown, and whether you need a flow computer. We recommend sending gas composition, minimum and maximum flow rate, and operating pressure. Without that data, a supplier can only guess.
Typical Ex-works Price Ranges from Silver Automation Instruments
These are budget ranges in USD, ex-works China. They do not include shipping, import duty, or local taxes.
Electromagnetic flow meter for water and wastewater: USD 320 to USD 2,400.
Oval gear flow meter for diesel and oil: USD 300 to USD 900.
Coriolis mass flow meter for oil and chemical: USD 2,800 to USD 12,000.
Thermal mass flow meter for air and gas: USD 450 to USD 1,200.
Vortex flow meter for steam and gas: USD 500 to USD 3,500.
Ultrasonic flow meter for large pipes or clamp-on use: USD 650 to USD 4,800.
Every project has a different final number. Because pipe size, installation style, and output protocol change the price. We can lock a quote within 24 hours after you send process data.
How to Get a Fixed Industrial Flow Meter Price
Here is the thing. Every flow meter quote changes when the fluid data changes. Send us these details on WhatsApp +86-25-52155837 or call Tel +86-25-68650347:
Pipe size in DN or inches.
Fluid name and viscosity in cP if it is not water.
Flow range in m3/h, L/min, kg/h, or SCFM.
Pressure in bar and temperature in °C.
Signal output: 4-20 mA HART, pulse, Modbus RS485, or wireless.
Power supply: 24 V DC, 220 V AC, or battery.
Hazardous area requirement: safe area, ATEX Zone 1, or IECEx.
Our sales team will reply with a specific model and a written quote. We do not send a generic price list because a DN50 water meter and a DN50 palm oil meter are not the same product.
FAQ
What is the cheapest flow meter for clean water?
If the pipe is full and the water has conductivity above 10 µS/cm, an electromagnetic flow meter is the most reliable low cost option. A DN50 model starts around USD 350 ex-works.
Can I use a water flow meter for diesel?
Do not use an electromagnetic flow meter for diesel. Diesel is non-conductive. Use an oval gear or Coriolis mass flow meter. We have seen customers purchase water meters for fuel and damage the liner.
Which flow meter works for heavy oil with high viscosity?
Oval gear flow meters handle high viscosity well. For viscosity above 500 cP, choose an oval gear meter or a Coriolis mass flow meter. Send the cP value and operating temperature.
How long does delivery take to Jakarta, Surabaya, or Ho Chi Minh City?
Standard models ship within 5 to 10 working days. Custom liners or hazardous area certified units take 15 to 30 working days. Sea freight to Jakarta is 8 to 15 days. Air freight is 3 to 5 days.
What details are needed for a fixed price?
Send pipe size, fluid, flow range, pressure, temperature, power supply, and output signal. WhatsApp +86-25-52155837 is the fastest channel for an official quote.
Silver Automation Instruments supplies industrial flow meters to distributors and end users across Southeast Asia, Australia, the Middle East, Latin America, and Africa. Contact us on Tel +86-25-68650347, WhatsApp +86-25-52155837, or WeChat +86 15365082610. You can also visit flow-meter.com.au for full specifications and installation drawings.
Hot News
Related AD
