Business Type:Supplier
Field of expertise:Environmental Protection
Company Nature:Non-Profit Organization
Company Scale:1-49 People
Company Region:Jilin (Province)
Contact Number:+86-25-52155837
Legal Person:
Conpany Site:https://flow-meter.com.au
Mobile Phone:WeChat: +86 18936759191
Post Code:119393
Fax:+86-25-52155837
Company Address:SILVER AUTOMATION INSTRUMENTS LTD
Description:
1. The continuation of yesterdays problem, behind the measuring valve, we believe it is atmospheric pressure, so how to measure this The word measurement can be understood as calibrating flow rate or daily measurement. There are multiple options based on the approximate range of gas flow rate and accuracy requirements: 1. Small flow rates below 1 L/min can be measured/calibrated using the most basic but accurate soap bubble flowmeter. It is particularly suitable for situations where the back pressure is zero. 2. There are different types of rotameters available for flow rates ranging from 0.01 to 100 L/min, and the accuracy is still acceptable. 3. Mass Flow Meter (MFM) is available for flow rates ranging from 0.01 to 1000 L/min, with high accuracy. 4. The flow rate ranges from 1-100 Nm3/h and can be measured using a critical Venturi nozzle (which is also one of the standard methods for measuring gas flow), with high accuracy. Standard English documents can be found online. 5. Larger industrial flow rates are measured using orifice pressure differential flow meters, vortex street flow meters, etc., with acceptable accuracy. Of course, the above traffic ranges are roughly divided. Based on the "steel cylinder" you mentioned earlier, I understand that you want to calibrate the flow curve of the measuring valve at different scales. I estimate that the flow rate should not exceed 200 L/min (at this flow rate, a 51 liter nitrogen cylinder can be emptied in 1 hour). A mass flow meter can be used to calibrate the measuring valve, and then the mass flow rate can be converted to a standard volumetric flow rate based on the gas composition and approximate molecular weight, according to the ideal gas equation. The advantage of using MFM calibration is that there is no need to worry about only changes in port pressure. It measures the molecular flow rate and has an automatic compensation function for pressure. Usually, metering valves have their own calibration curves, so sometimes you only need to calibrate a few points (such as 10, 50, 100% range) for flow verification. I dont know if my understanding of your question is correct. 2. What is a turbine flow meter
A turbine flow meter should be a turbine flow meter, which is directly transliterated as a turbine flow meter by some people.
. Turbine flowmeter is a new type of intelligent instrument developed using advanced ultra-low power single-chip microcomputer technology, which integrates turbine flow sensor and display integration. It has obvious advantages such as compact structure, intuitive and clear readings, high reliability, no external power interference, lightning resistance, and low cost. The turbine flow sensor is paired with a display instrument. Sensors have the characteristics of high accuracy, good repeatability, long lifespan, and easy operation. It can be widely used in industries such as petroleum, chemical, metallurgy, and papermaking to measure the instantaneous flow rate and total volume of liquids.
What is CMF?
"CMF" has different meanings in different fields. Here are some common explanations: Continuous Microfiltration Technology: English for "Continuous Microfiltration" or "Continuous Membrane Filtration".
. This is a new type of membrane separation process in environmental engineering, consisting of microfiltration membrane components, backwash system, etc. It adopts a modular structure, cross flow filtration and intermittent automat
『SILVER Official Website SERVICE』
Current position > Contact Us
