Product
ProductCurrent position > Product detail

DN32 flowmeter

『DN32 flowmeter』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)

What are the measurement ranges of electromagnetic flow meters?

1、 Electromagnetic flowmeter is a very sensitive flowmeter that can measure the flow rate of conductive liquids. It is also economical and has a diameter of generally DN10-- DN2000. It can measure sewage or corrosive liquids and has a wide range of applications;

2、 Electromagnetic flow meters can only measure volumetric flow rates, with units such as m3/h (cubic meters/hour), L/min (liters/minute), etc. They have pure grinding instantaneous flow rate display and cumulative flow rate display;

3、 The measurement range corresponding to electromagnetic flow meters of different diameters is: (unit: m3/h): DN10:0.03-4.24; DN15：0.06---9.54； DN20：0.12---16.96； DN25：0.18---26.5； DN32：0.29---43.42； DN40：0.45---67.85； DN50：0.7---106； DN65

1.19---179； DN80

1.8---271； DN100：2.28---424； DN125：4.41---662.。。。。。 For more detailed information, please refer to the technical article on the website of Shandong Qiangsheng Automation Technology Co., Ltd.... Www.qszdh.com

What is the diameter of a 2.1-inch, 1.2-inch, 2-inch, 2.5-inch flow meter?

In industrial and civilian pipelines, the diameter of flow meters is usually expressed in inches or metric units DN (German designation). Specifically, the diameter of the 4-point flowmeter is DN15, with a diameter of 15 millimeters. Similarly, the diameter of the 6-minute flowmeter is DN20, with a diameter of 20 millimeters. The diameter of the 1-inch flowmeter is DN25, with a diameter of 25 millimeters. Further up, the diameter of the 1.2-inch flowmeter is DN32, with a diameter of 32 millimeters, and the diameter of the 1.5-inch flowmeter is DN40, with a diamete

DN32 flowmeter
r of 40 millimeters. The above caliber information is provided by Changzhou Kute Hot Meter Company, and these data are crucial for the correct selection and installation of flow meters. Choosing the appropriate flowmeter diameter can ensure measurement accuracy, avoid pressure loss in fluid flow, and improve the service life of the equipment. For example, if the diameter of the pipeline is smaller than the diameter of the flow meter, it will cause the fluid flow rate to be too fast, thereby increasing energy loss; On the contrary, if the diameter of the flowmeter is smaller than the diameter of the pipeline, it may cause the flowmeter to be unable to fully respond to changes in fluid flow rate, affecting measurement accuracy. In practical applications, multiple factors need to be considered when determining the diameter of a flowmeter, including but not limited to the diameter of the pipeline, the expected maximum flow velocity, the properties of the fluid, and the required measurement accuracy. Correctly selecting the diameter of the flow meter can ensure maximum system efficiency while reducing energy consumption and maintenance costs of the sail belt.

3. What are the measurement ranges of turbine flow meters?

1、 Turbine flowmeter is based on the electromagnetic induction generated by the rotation of turbine blades inside the flowmeter to measure the flow rate. It can measure both liquids and gases, and is very sensitive. The diameter for measuring liquids is generally DN4- DN200, and for measuring gases it is generally DN20- DN300;

2、 Turbine flowmeter measures liquids with a very small diameter and good economy. The units are generally m3/h (cubic meter/hour), L/min (liter/base silve

『SILVER Official Website SERVICE』

Copyright2026SILVER E-Commerce
[email protected]
+86 15365082610