German electromagnetic flowmeter| CO2 flow measurement

『German electromagnetic flowmeter』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)

1. BADGER METER flowmeter from Germany

BADGER METER flowmeter from Germany (BADGER METER electromagnetic flowmeter) Introduction: BADGER METER from Germany is an innovator in flow measurement, water quality, and control products, committed to helping protect precious resources around the world. Its flow meter product line is extensive, including electromagnetic flow meters, oscillating disc flow meters, turbine flow meters, mass flow meters, ultrasonic flow meters, differential pressure flow meters, open channel flow meters, etc. The following is a detailed introduction to the German BADGER METER electromagnetic flowmeter:

Overview of Electromagnetic Flowmeters BADGER METER manages key flow applications to improve accuracy, reduce system maintenance, and meet challenging liquid conditions. This volumetric flowmeter has no moving parts and is very suitable for wastewater applications or any conductive or water-based dirty liquids.

II. Main electromagnetic flowmeter product ModMAG ® Overview of M2000 Electromagnetic Flow Meter: ModMAG ® The M2000 amplifier is highly suitable for bidirectional flow measurement of fluids with conductivity>5 μ S/cm (softened water>20 μ S/cm). ModMAG ® The M2000 displays high precision, is easy to use, and can be selected for a wide and flexible range of applications. Advantages: Multiple lining and electrode materials are available for selection, ensuring maximum compatibility and minimal maintenance during long-term operation. Strict precision standards, with tedious processor based signal conversion, accuracy of ± 0.20% at a rate of ± 1 mm/s, and appropriate linear operation. Provide BACnet MS/TP communication protocol to ensure seamless integration with Building

Management Systems (BMS), and be the first full caliber inline electromagnetic instrument to complete the BACnet Testing Laboratory (BTL) certification program. Application diversity, measuring water, wastewater, water-based fluids, and other liquids with minimal conductivity, suitable for a wide range of applications. Specification: Size: 6... 2032 millimeters Temperature range: up to 150 ° C Flow range: 0.03... 12 meters/second Accuracy: ± 0.2% Communication: RS232 Modbus RTU; RS485 Modbus RTU, HART, Profibus DP, and BACnet MS/TP require separate daughter boards ModMAG ® Overview of M5000 Electromagnetic Flow Meter: ModMAG ® M5000 is a battery powered electromagnetic flowmeter that has very high accuracy even at very low flow rates. Excellent repeatability and above average battery life make this innovative water meter an indispensable part of the water market. Typical applications include leak detection in water supply networks, water usage measurement, and irrigation plants. Advantage: The standard instrument is equipped with an internal data logger that can be read through IrDA or M-Bus with Modbus RTU protocol. The collected data can also be retrieved through radio frequency or GSM/GPRS, allowing for centralized compilation and evaluation of the data. Optional power supply voltage mode, the instrument can be powered by power supply voltage, and in case of power failure, it is powered by an internal battery, thus saving important data. The battery life is long, and due to the optimization of its electronic devices for the lowest energy consumption, it can achieve a running time of up to 10 years. Specially designed for outdoor use, ModMAG ® The M5000 has a waterproof casing with a protection level of IP67 (opti

German electromagnetic flowmeter

1. BADGER METER flowmeter from Germany

『SILVER Official Website SERVICE』